1.Introductions
JUST1000 is an important audio test product which is produced by RS after TrustSystem. Its wide range of frequency response(5-80kHz), low ground noise(-119dB), high output(16Vrms), high input(12Vrms), high flatness(20-20kHz ±0.013dB), high reliability(10 times tests ±0.00005dB) ensure it to be a high precision test platform. It can complete not only routine tests, but some tests which require higher precision, such as speech noise test, HIFI test and the standard verification of some other test platforms.
When JUST1000 is used with TrustSystem, it has high speed, high reliability and high performance. They can complete routine tests, such as the test of frequency response, THD, Rub & Buzz, sensitivity, phase position, SNR, stepped level sweep and impedance. And they can become signal generator, level meter, display waveform and analyze frequency spectrum. In addition to this, they also have dc component analysis, voice noise analysis and each order harmonic display to perfect the audio system function. What's more, they inherit the wonderful UI of TrustSystem, which can allow users to set up completing a standard audio test circulation in 2-3 seconds. The high performance of them totally meets the need of the laboratory test precision and the high efficiency totally meets the need of the test time limit in production line.
2.Characteristic Parameters
◆ Frequency Response | 5-80kHz |
◆Maximum Input | 12Vrms |
◆ Background Noise | -119dBV |
◆ Flatness | ±0.013dB(20-20kHz) |
±0.005dB(100-10kHz) | |
±0.0001dB(repeating the test 10 times) | |
◆ THD+N | -109dB |
Pic 1 Flatness——Repeating the test 10 times
3. Test Items
Frequency Response |
IMD |
Sensitivity |
SNR |
THD |
Wav Monitor |
THD+N |
RMS |
Rub & Buzz |
Gain |
Voice Noise |
Noise Level |
Phase |
Signal Generator |
CrossTalk |
Level Meter |
DC Level |
Spectrum |
Stepped Level Sweep |
Wav Record |
Impedance |
4.Characteristics
JUST1000 uses the voice noise algorithm and has unique detecting means to the noise which only the voice signal can excite. It can precisely and steadily detect the noise in the products which only the voice signal can excite with the unique high precision input performance of JUST1000
|
Contraposing motor vibration, JUST1000 makes special test analysis. It can not only test motor vibration frequency and acceleration magnitude directly, but also detect some higher-order test items such as the multiplying components of each order, the lifting time, off-time of the motor.
|
![]() ![]() |
5. All Parameters
Equilibrium Model | |
Sampling Rate:48kHz/96kHz/192kHz |
THD+N:(Input)-108dB |
KBPS: 32-bit | (Output)-109dB |
Input Impedance:600Ω/200kΩ |
(Loop Back)-108dB |
Filter:DC/Butterworth/Eliptic |
THD:(Input)-108dB |
Input Channels:4 |
(Output)-116dB |
Output Channels:4 |
(Loop Back)-115dB |
Maximum Input Voltage:12V |
Flatness:(5-100Hz)0.38dB |
Maximum Output Voltage:16V |
(20-20kHz)0.025dB |
Frequency Response:5-80kHz |
(20-80kHz)0.31dB |
Channel Isolation:(1Vrms/1kHz) -108dB |
Background Noise:(Input)-119dB |
(12Vrms/1kHz) -108.5dB | (Output)-118dB |
Nonequilibrium Model | |
THD(Input)-112dB | THD+N(Input)-108dB |
(Output)-116dB | (Output)-106dB |